Notify me when the price drops
We will email you if we find a lower price on this product!
This series multimeters are compact 3 1/2 digits digital multimeters for measuring DC and AC current, resistance, temperature, diode, transistor, continuity and capacitance.
They feature polarity indication, data hold, MAX mode, overrange indication and auto power off. They are easy to operate and are ideal instrument tools.
Features
Max.1000A AC/DC current measurement with current clamp
3 1/2-digit backlight LCD,with a max.reading 1999
Manual/auto range mode
Maximum value hold mode
Autoatic polarity indication
Data-hold mode
Overload protection
Low battery indication
Low power consumption
General Specification
Display: LCD,1999 counts,updates 2-3 times/sec
Overrange Indication: "OL" shown on the display
Battery: 1.5V.AAA or equivalent,3 pieces(NOT INCLUDED)
Negative Polarity Indication: negative sign"-"shown on the display automatically
Operating Temperature: 0 to 40 degree,
Storage Temperature: -10 to 50 degree,
Dimension:158x75x35mm
Weight: about 200g
Specification
DC Voltage: 200mV/2V/20V/200V/250V
AC Voltage: 2V/20V/200V/250V
DC/AC Current: 200μA/2000μA/20mA/200mA/2A/10A
DC/AC Current With Clamp: 200A/1000A
Resistance: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ
Temperature: -20°C to 1000°C/0°F to 1800°F
Capacitance: 20nF/200nF/2μF/20μF/200μF/1000μF
hFE Test: 0-1000
Diode Test: The approximate forward voltage drop of the diode will be displayed.
Continuity Test: Less than 30Ω will beeps. 30Ω-100Ω may or may not beep. Will not beep if the resistance is over 100Ω
Large Backlit LCD Display
Pressing down "sun symbol" button to open LCD backlit, you can recognize any test value clearly even in dark place.
Fold out Support StandIt can be adjusted freely within 90°, making it easy to use and record measurements providing a simpler view.
3 pieces 1.5V battery, AAA or equivalent needed(NOT INCLUDED)
If you want to replace the battery and fuse, please refer to the Usual Manual.
Measuring DC or AC Voltage Measuring DC or AC Current
Display: 3 1/2-digit LCD, with a max. reading of 1999
"RANGE " Button: Used to switch between autorange mode and manual range mode as well as to select the desired manual range
Power Switch: Used to turn on/off the multi meters
Function/Range Switch: Used to select desired function and/or range
“10A” Terminal: Plug-in connector for the red test lead for current( 200MA-10A ) measurement
“COM” Terminal
“INPUT” Terminal
“DATAH”/ “MAXH” Button: Used to enter/exit Data hold/MAX recording mode
Copyright of XXXX. All rights reserved.
Powered by SoldEazy